Wheel-loader FL955F

Branded configuration is good integration, reliable in quality, efficient in power transmission and easy in parts purchase. Main Features1.The branded Weichai Styer turbo-charged diesel engine is of strong power, high reliability, low fuel consumption. It is energy conservative and environment friendly. 2.5-ton Suoma axle is adopted with high loading capacity and high reliability. 3.The heat radiating system is of air-cooled style. With optimized design, reasonable distribution and arrangement, it increases effective area of heat radiation and thus improves the adaptability of the product working in severe environment. 4.The hydraulic rubber hose connector adopts the technology of sealing with 24°single cone. The high pressure rigid tube is in solid forged structure to prevent leakage. 5.The main knife board of the bucket uses wear resistant steel plate with high strength. Therefore, the knife board boasts high wear resistance. 6.The rocker arm is in box structure providing higher loading capacity. 7.The sealing of the gas circuit is optimized to improve the security of the whole machine. 8.The shaft sleeve material of the hinge joint is the advanced allumen, extending the longevity of wear resistance. 9.The open side hood can be opened with a large angle to maximize the space for check and reparation, which serves for easy maintenance. 10.Place inconvenient for grease fueling such as upper pin roll of the swing arm, hinged pin roll and steering pin roll for convenient maintenance. 11.Rotatable hydraulic fuel tank, oil pump for easy maintenance and double clutch speed change valve are also equipped Technical parametersBranch out all Contract allTechnical parameters Rated Load (kg)Operating Weight (standard configuration)(kg)Rated Bucket Capacity (m³)Maximum Digging Force (KN)Maximum Traction (KN)Total Cycling Time (s)Maximum Dumping Height (mm)Maximum Dumping Distance (mm)Forward Speed Range (km/h)Backward Speed Range (km/h)Transportation Clearance (length*width*height)(mm)Maximum Steering Angle (°)Maximum Climbing Capacity (°)Minimum Turning Radius (mm)Tyre SpecificationModelTypePower (kw)Maximum Torque (N.m)Cylinder Diameter (mm)Distance of Travel (mm)Output Volume (L)Fuel Oil Consumption (g/kw.h)Pressure of Working System (Mpa)Type of Motor Braking SystemType of Parking/Emergency Braking SystemFuel Oil Tank Capacity (L)Hydraulic Fuel Tank Capacity (L)

Major Parameter
5000
16650
2.8
≥175
≥160
≤10.2
3135
1195
0~42
0~17.5
(7750,7650)*2980* (3420±50)
35
29
6850
23.5-25
Engine Parameter
Weichai WD10G220E23
6-cylinder, in-line, direct injection and turbocharged
162
900
126
130
9.756
220
Hydaulic System
18
Single pipe air pushing oil 4-wheel clipper disc braking
Clipper disc braking
Fuel Tank Capacity
270
270

Supporting Equipment	Standrad bucket and enlarge bucket

   

Wheel-loader FL955F